Reface, Paint, or Replace Your Kitchen Cabinets?
Cabinets are half your kitchen budget, so this one decision sets the tone for everything else. The good news: the right answer is usually discoverable in ten minutes with a screwdriver and honest eyes.
Here's the decision framework we walk homeowners through.
The three paths, priced honestly
| Path | Typical Chicagoland cost | Best when |
|---|---|---|
| Paint existing | $3,000–$8,000 | Boxes and doors are solid; you like the layout; budget is tight |
| Reface (new doors/fronts/veneer) | $8,000–$18,000 | Boxes are solid plywood; doors are dated or damaged; layout works |
| Replace | $15,000–$45,000+ | Boxes are failing particleboard, layout is wrong, or you want new interiors |
Painting and refacing only make sense on cabinets worth keeping — which is the whole question.
The box-condition test
- Open a sink-base door: swollen, flaking particleboard floor = water history; replacement territory
- Press interior side panels: solid plywood feels rigid; sagging shelves and soft panels don't improve with paint
- Check hinge screw holes: stripped-out holes throughout mean the material is done
- Face frames racked or separating from boxes = structural, not cosmetic
- Smell test: persistent musty interiors indicate moisture you can't paint over
What each path really gets you
- Paint: transformative color change; original interiors, hinges upgradable to soft-close; 1–2 weeks
- Reface: showroom-new exterior, new hardware, optional drawer boxes; interiors stay original; ~40–60% of replacement cost; 1–2 weeks
- Replace: new everything — interiors, drawer glides, layout freedom (islands, pantries, trash pullouts); triggers counter replacement since tops rarely survive removal; 4–8 weeks with lead times
The hidden coupling: replacing cabinets almost always means replacing counters too. Budget them together or not at all.
Frequently asked questions
Does painted-cabinet finish hold up?
Professionally prepped and sprayed with cabinet-grade coatings, yes — years of daily use. Brush-and-roll DIY over unscuffed thermofoil, no.
Is refacing 'cheap-looking'?
Quality refacing with real wood or rigid thermofoil doors is indistinguishable from new cabinetry from the outside. Bad refacing looks like sticker shelf paper — the installer matters more than the method.
Can I replace just the doors myself?
If boxes are standard sizes, door-only swaps are possible — but hinge boring, alignment, and finishing are fussier than they look.
What about open shelving instead?
A few open shelves as accents, great. Whole-kitchen open shelving photographs better than it lives — most families quietly regret it.
